PLP Filter questions 

Perfect combination for maximum safety: the Smart 2.0 reliably locks the rope in the event of a fall, while at the same time the Safety Gate prevents the Smart HMS from twisting in the belay loop of the climbing harness. An essential gadget for safe climbing.

Smart 2.0 Belay Package

Smart 2.0 Belay Package - one size, phantom

Nordwand Alpine Belay. An innovative and robust belay device. With V-shaped grooves and rear rope-bearing surfaces made of abrasion-resistant steel to prevent wear. The steel insert also prevents the belay device from overheating. The housing is made from lightweight aluminum, so that the total weight of the device amounts to just 80 grams. Suitable for double, half and single ropes ranging from 7.5 to 10.5 mm.

Nordwand Alpine Belay

Nordwand Alpine Belay - black, one size

The must-have package for beginners. The Smarter pack ensures additional safety for the Smart 2.0 belay device and locks to prevent falls even in the event of incorrect use (belaying hand held above the belay device). The Safety Gate prevents the Smart HMS from twisting in the climbing harness' belay loop.

Smarter Belay Package

Smarter Belay Package - one size, phantom

Smarter Belay Package - galaxy, one size

Add-on for the Smart 2.0 belay device to prevent the consequences of beginner’s errors. The innovative add-on for the Smart 2.0 increases safety even in the event of misuse by the belayer. The Smarter is simply attached to the Smart 2.0 and, in the event of a fall, it triggers the blocking of the rope even if the brake rope is incorrectly held above the Smart 2.0. It comes into effect only in the event of misuse and has no adverse effect on normal rope handling.

Smarter

Smarter - one size, phantom

Intuitive belay device with reliable blocking of the climbing rope. The first generation of the Smart belay device was successfully launched in 2009. Built on the experience the new Smart 2.0 offers significantly improved braking effectiveness as well as optimized geometry and intuitive handling. The newly developed brake insert blocks the rope in the event of a fall. The belaying action of the Smart 2.0 is the same as the previous model and is therefore tailored to the belayer's reflex movements.

Smart 2.0

Smart 2.0 - one size, phantom

Smart 2.0 - dark orange, one size

Smart 2.0 - dark ultramarine, one size

Smart 2.0 - one size, silver

Smart 2.0 - galaxy, one size

Smart 2.0 - grey, one size

The use of beam technology has made it possible to design one of the lightest figure-8 rappel devices in the world, without any loss in performance. The optimized size/weight ratio and the large carabiner opening, which also enables use with thin ropes, makes the Bionic 8 the absolute all-rounder.

Bionic 8

Bionic 8 - grey, one size

A belay device for use in alpine terrain, based on the tube principle. As well as securing a lead climber, the very light Wall Alpine Belay also allows one or two second climbers to be independently belayed in an autolocking mode from the fixed point. The optimized geometry also allows comfortable belaying as well as reliable blocking in the event of a fall by the second climber, the blocking action can be released again using a webbing sling and the large eyelet on the device. The V-shaped grooves allow the controlled holding of lead falls, even at low levels of manual force. Suitable for twin, half and single ropes from 7.5 to 10.5 mm in diameter.

Wall Alpine Belay

Wall Alpine Belay - one size, orange

Very lightweight belay device based on the tube principle; suitable for double, half and single ropes from 7.5 to 10.5 mm in diameter. The V-shaped grooves permit controlled retention of drops even at low manual force as well as controlled lowering of the climber.

Whattypeofproductareyoulookingfor?

What
type
of
product
are
you
looking
for?