Stepripravljeninasezono?

1. Preizkus baterije

Preverite svoj Barryvox pred vsakim smučarskim izletom, idealno preden zapustite dom. Za to vklopite napravo in si oglejte zaslon za samotest in test baterije. Šibke baterije je treba takoj zamenjati

2. Poškodbe in nečistoče

Poleg tega redno preverjajte napravo glede mehanskih poškodb in nečistoč. Posebej pazite, da so stiki baterije čisti in nepoškodovani ter da glavni stikalnik pravilno deluje

Neskladja

Če med pregledom opazite kakršnekoli nepravilnosti, je bistveno, da svojo napravo pošljete v Mammut Barryvox servisni center za nadaljnje preglede.

Lahko najdete popolne informacije za svoj BarryvoxTu 

Preverjanje je prikazano na podlagi primera "Snemljivi sistem zračne blazine 3.0". Posamezni koraki za različne sisteme zračnih blazin so prav tako razloženi v ustrezni Ročniki 

Naši video tudi zagotavlja dodatne koristne informacije.

Preglejte svoj sistem za varnostno blazino pred in po vsaki uporabi, da ne najdete znakov poškodb in obrabe, kot so razpoke v ohišju, udrtine, vidne niti itd. Preverite nahrbtnik, naramnice in bokovni pas za luknje, raztrganine in poškodovane šive. Če se varnostna blazina namoči, jo razprostrite in pustite, da se posuši. Pred vsako uporabo preverite tudi sistem za varnostno blazino, da zagotovite, da je popolnoma funkcionalen. .

Za to naredite, sledite opisom in ilustracijam spodaj:

Prepričajte se, da je sistem zračne blazine pravilno nameščen. Da to storite, odprite zadrgo na žepu zračne blazine in ji potisnite zatič desno. Sistem zračne blazine mora ležati čez sivo trak (rdeč na ilustraciji).

Make sure the airbag is not attached the wrong way round.

The airbag system pocket must be closed.

The deployment handle must not be wound around the airbag system.

The four colored airbag buckles must be threaded through the appropriate loops from the bottom to the top.

CAUTION: The airbag balloon must not be rolled up but must be folded for packing as follows. Check the airbag balloon for any holes or tears before folding.

To hold the folded airbag together, close the hook and loop fastener over the airbag opening, carefully close the zipper and attach to the loop.

The hook of the deployment handle must be pushed securely into the loop.

Make sure the pressure in the cartridge is correct and that the cartridge is completely screwed in and secured.

Cartridge with manometer:
at room temperature (20° C/68° F), the arrow must be in the green area.

Cartridge without manometer:
the weight of the cartridge, without the protective cap, must be the same as the weight stated on the cartridge (+/- 5 g).

Screw the cartridge all the way into the mechanism, secure it in the pocket using the hook and loop fastener and close the pocket.

CAUTION: The cartridge is completely screwed only when the black rubber seal is no longer visible.

Perform at least one training deployment each season. This will allow you to familiarize yourself with the system and ensure you can act quickly and intuitively in an emergency. To avoid having to fold the avalanche airbag again after a training deployment, you can use the trigger test tool to very easily carry out a test deployment without a pressure cartridge.

To do this, screw the trigger test tool all the way into the deployment mechanism.

Warning: The trigger test tool must not be overtightened.

Put the avalanche backpack on for the test. In order to make the situation as realistic as possible, we recommend wearing your skiing clothes during the test deployment. Deploying the airbag while wearing gloves is particularly good practice. To deploy the airbag, pull the deployment handle hard and decisively. After the test, unscrew the trigger test tool from the deployment mechanism again.