Kasoledhooajaksvalmis?

1. Aku test

Kontrolli oma Barryvoxi enne iga suusamatka, soovitatavalt juba enne kodust lahkumist. Selleks lülita seade sisse ning jälgi enesetesti ja patareitesti näitu. Tühjenevad patareid tuleb kohe välja vahetada.

2. Kahjustused ja mustus

Kontrolli seadet regulaarselt ka mehaaniliste kahjustuste ja mustuse suhtes. Eelkõige veendu, et patarei kontaktid oleksid puhtad ja kahjustusteta ning pealüliti töötaks õigesti.

3. Ebakõlad

Kui märkate kontrollimise käigus mis tahes kõrvalekaldeid, tuleb seade kindlasti täiendavaks kontrolliks Mammut Barryvoxi teeninduskeskusse saata.

Oma Barryvoxi kohta leiad täieliku teabesiin 

Kontrolli on illustreeritud „Removable Airbag System 3.0“ näitel. Erinevate turvapadjasüsteemide üksikuid samme selgitatakse samuti vastavasjuhendid 

Meievideo pakub ka täiendavat kasulikku teavet.

Kontrollige oma turvapadjasüsteemi enne ja pärast iga kasutuskorda kahjustuste ja kulumise märkide suhtes, nagu praod korpuses, mõlgid, nähtavad niidid jms. Kontrollige seljakotti, õlarihmasid ja puusavööd aukude, rebendite ja kahjustatud õmbluste suhtes. Kui turvapadi peaks märjaks saama, laotage see laiali ja laske kuivada. Kontrollige turvapadjasüsteemi enne iga kasutuskorda ka selle täieliku toimivuse tagamiseks.

Selleks järgi alltoodud kirjeldusi ja illustratsioone:

Veenduge, et turvapadjasüsteem oleks õigesti paigaldatud. Selleks avage turvapadja ballooni tasku tõmblukk keskelt ja lükake tõmbluku kelk paremale. Turvapadjasüsteem peab asetsema halli rihma peal (joonisel punane).

Make sure the airbag is not attached the wrong way round.

The airbag system pocket must be closed.

The deployment handle must not be wound around the airbag system.

The four colored airbag buckles must be threaded through the appropriate loops from the bottom to the top.

CAUTION: The airbag balloon must not be rolled up but must be folded for packing as follows. Check the airbag balloon for any holes or tears before folding.

To hold the folded airbag together, close the hook and loop fastener over the airbag opening, carefully close the zipper and attach to the loop.

The hook of the deployment handle must be pushed securely into the loop.

Make sure the pressure in the cartridge is correct and that the cartridge is completely screwed in and secured.

Cartridge with manometer:
at room temperature (20° C/68° F), the arrow must be in the green area.

Cartridge without manometer:
the weight of the cartridge, without the protective cap, must be the same as the weight stated on the cartridge (+/- 5 g).

Screw the cartridge all the way into the mechanism, secure it in the pocket using the hook and loop fastener and close the pocket.

CAUTION: The cartridge is completely screwed only when the black rubber seal is no longer visible.

Perform at least one training deployment each season. This will allow you to familiarize yourself with the system and ensure you can act quickly and intuitively in an emergency. To avoid having to fold the avalanche airbag again after a training deployment, you can use the trigger test tool to very easily carry out a test deployment without a pressure cartridge.

To do this, screw the trigger test tool all the way into the deployment mechanism.

Warning: The trigger test tool must not be overtightened.

Put the avalanche backpack on for the test. In order to make the situation as realistic as possible, we recommend wearing your skiing clothes during the test deployment. Deploying the airbag while wearing gloves is particularly good practice. To deploy the airbag, pull the deployment handle hard and decisively. After the test, unscrew the trigger test tool from the deployment mechanism again.