Mammut develops and improves our products continuously. This also applies to our avalanche safety equipment and the leading Barryvox avalanche transceiver. Our key focus areas are reliability, functionality and intuitive operation. Because in an emergency simple, intuitive operation is essential - every second counts.
The Barryvox avalanche transceivers have been tested extensively and their operation is tailored to the needs of emergency situation. Based on user feedback, Barryheart and PULSE Barryvox firmware upgrades are available now.
SMART SEARCH simplified visual interface for guided fine search (Barryvox S only)
PRO CHECK more accurate measurements with an easier user interface (Barryvox S only)
ALTERNATIVE SEARCH MODE Better sound and more precise guidance using the analog tone when signal overlap or interference prevent use of standard mode (Barryvox S only)
BATTERY LIFE Longer battery life, especially in low temperatures
Simplified visual interface with animated search arrow for guided fine search. The intuitive instruction guides the rescuer quickly and precisely through the fine search and reduces the search time.
Barryvox S Pro Check
More accurate measurements with an optimized user interface for intuitive operation of the Pro Check. We especially recommend carrying out the Pro Check on older 1 and 2 antenna devices and, on avalanche transceivers that have not been checked by the manufacturer for some time. The Pro Check offers additional safety and helps to immediately identify any non-compliant avalanche transceiver that could reduce the effectiveness of a rescue.
Barryvox S alternative search mode (analog) Improved sound and better differentiation between analog tones allows more precise range and direction guidance Alternative Search Mode. The Alternative Search Mode is used mainly when signal overlap or interference prevents differentiation of multiple buried subjects in standard mode.
Battery capacity display Longer battery life for the use of alkaline and lithium (Barryvox S only) batteries, especially in low temperatures.
Performance Boost: In addition, the BarryHeart 3.2 firmware optimizes the following functions of the Barryvox and Barryvox S:
Precision and speed of signal analysis, in particular when searching for older avalanche transceivers
Stability of the marking function in the case of signal overlapse
More intuitive buried subject list: the nearest buried subject is now shown closest to the searcher on the burial list while the subject furthest away appears at the top
DEVICE-TO-DEVICE UPDATE allows device-to-device upgrades to the newest BarryHeart firmware
GROUP CHECK quick and easy functional check of all transceivers in a group
PRO CHECK (Barryvox S only) checks the transmitted signal to identify transceivers with compromised function that could reduce the effectiveness of a search
ALTERNATIVE SEARCH MODE More reliable and better resolution of the analog tones when (Barryvox S only) signal overlap or interference prevents use of the standard mode
Group Check The intuitive Barryvox group test allows you to carry out a quick and easy check of both transmission frequency and range of all avalanche transceivers at the start of a tour. The distance to the transceiver to be checked is indicated on the display, clearly differentiating individual devices in the Barryvox group check. Similar to a partner check in climbing, we recommend carrying out the group check before the start of each tour to ensure all avalanche transceivers are working correctly.
If space limitations make it impossible to carry out a group check, a minimal test can be carried out to ensure all participants’ avalanche transceivers are transmitting.
Barryvox S Pro Check The Barryvox S Pro Check allows the quick and precise measurement of an avalanche transceiver’s transmission frequency, cycle duration and pulse length before a tour. This function offers additional safety,especially in cases where some members of a group are using older 1 and 2 antenna devices. It ensures immediate detection of any non-compliant avalanche transceivers that are likely to cause searching problems such as signal overlap within the group.
Barryvox S alternative search mode (analog) The alternative search mode uses the analog tone in addition to the distance and direction to the avalanche transceiver with the strongest signal. The alternative search mode is used mainly when signal overlap or interference prevents differentiation of multiple buried subjects in standard mode.
Optimized interference resistance Thanks to the Barryvox transceiver’s high resistance to interference, electronic gadgets (smartphones, headlamps, radios, etc.) are less likely to cause inaccurate direction and distance displays or ghost signals.
The BarryHeart 3.0 firmware upgrade optimizes the following functions:
Faster and more precise signal analysis
More stable marking function during signal overlaps
Faster direction display after reception of the first signal
Improved guidance during 180° errors
Faster and more stable list of buried subjects
Improved battery life display
Device-to-device update Instructions
This new function allows upgrades to the BarryHeart 3.2 firmware to be made from one device to another. This makes it possible to run the firmware upgrade even where there is no access to a network or service point - very easily from device to device.
Same type of device.
Both Barryvox devices have a battery capacity of over 30%.
Only one simultaneous upgrade is possible between two devices in the same building or within a radius of 50 meters.
Upgrade must take place between devices utilizing the same W-Link region (no device-to-device upgrade for devices purchased in Japan).
DEVICE-TO-DEVICE UPDATE PROCEDURE:
Power off both devices.
Switch on the device with the most recent firmware. Under “Setting,” select the “Device-to-Device Update” function and press the main button on the front to confirm.
Then follow the instructions on the display.
Power off both devices.
On the device with the most recent firmware, press and hold the main button on the front while at the same time shifting the main switch from OFF to SEND. Hold the main button down until “UP” appears on the display.
The device is now ready for the transfer. (Press the main button if no update is to be carried out)
On the device to be updated, press and hold the main button while at the same time shifting the main switch from OFF to SEND. Release the main button after 2 seconds.
Installation of the firmware on the device will start and the progress will be shown on the top left of the display.