We have identified a potential issue with the closing mechanism of the carabiners used in the Skywalker Pro Via Ferrata and the Skywalker Pro Turn Via Ferrata Sets. We respectfully request that all consumers carefully inspect their Skywalker Pro and Skywalker Pro Turn Via Ferrata and return all potentially affected products for replacement.
Assisted belay resistor for increased rope friction
€100 €100
Gold
If you want to climb with someone lighter or heavier than you, this assisted belay resistor is the answer. The lightweight device attaches to the first quickdraw and increases rope friction, allowing a lighter belayer to catch and hold a heavier lead climber's weight. Thanks to the patented cam...
6/6Gym Climbing
5/6Sport Climbing
Activates only when needed for smooth handling
Dynamic belaying is still possible
Allows easier, controlled lowering of heavier climbers
Easy to release once activated
Attaches to the first quickdraw
Features Boost Mode: Attach the Mammut Assist Belay Resistor to the first bolt using a locking carabiner, allowing for faster engagement with larger weight differences
Activates even when only the first quickdraw is set, reducing the risk of groundfalls
For single ropes: 8.7-11.0mm
Weight difference allowance: Up to 35kg. Increases to 45kg in Boost Mode
Climbing
2040-03050
Weight220 g
Hardware Main Fabric80% Aluminium, 20% Steel
GPSR WarningThis item is classified as personal protective equipment (PPE). The instructions in the user manual must be read before and followed during use.
Mammut Assist is rated for mismatches of up to <35 kg when clipped to a quickdraw, or <45 kg in Boost mode with a locking carabiner. During a fall or while lowering, its cam mechanism activates, increasing rope friction.
Tough climb? Tougher gear
The redesigned best-selling Ophir harness collection, our light yet tough helmet range, and our 9.8 Crag Recycled Classic Rope are built to perform when it counts. People might question your life choices – but you know you can trust our climbing equipment.
